Latest Custom Builds — All Mountain

Shaun's Industry9 Torch hub ons FliteX 30mm rims

27.5" All Mountain Carbon Enduro Sapim Wheel Builds

Shaun's Industry9 Torch hub ons FliteX 30mm rims

After building a couple of sets of carbon hoops for Shaun, he came back with a pair of hubs for his downhill bike, and asked to build him a new SuperBoost wheelset. Again he selected the WheelTec FliteX rims - they are super tough, and priced very reasonably. Being a DH wheelset, we laced these up with plain gauge Sapim leader spokes to ensure ultimate lateral stiffness and strength. Shaun's feedback has been stellar. He loves them.    

Read more →


Shaun's Industry9 on FliteX 35mm Carbon 29er

29er All Mountain Carbon Sapim Wheel Builds

Shaun's Industry9 on FliteX 35mm Carbon 29er

Shaun wanted a tough all round set of carbon hoops for his new 29er. He was really happy with the White Industries XMR hubs we used on his previous pair, but wanted to try something different this time. Industry 9 have a new hub offering that he was keen to try. The Hydra freehub has 690 points of engagement, meaning instant engagement. An like all I9 products, the quality is excellent. We laced these beautiful hubs into a set of 35mm wide Wheeltec FliteX rims with 32 Sapim Race black spokes and brass nipples. A super tough and very bling solution. ...

Read more →


Matt's Higher Engagement Hope Pro4 on eThirteen Alloy

29er All Mountain Enduro Hope Sapim Wheel Builds

Matt's Higher Engagement Hope Pro4 on eThirteen Alloy

Matt loves his Commencal hardtail. He's riding it all the time, but what he does not like is the lower spec hubs in the OEM wheelset. Particularly the 30 degrees engagement of the freehub. That's a lot of "dead pedalling" when he really wants to get the power down. We rebuilt his rear wheel with a Hope Pro4 Boost rear hub. He now only needs to rotate the freehub by 8.2 degrees to pick up the power. A significant improvement, with added hub reliability and quality from Hope as well. We used Sapim leader plain gauge spokes on the rear driveside, and...

Read more →


Michael's Spank Oozy Trail 395 Wheelset Rebuild

27.5" All Mountain Enduro Sapim Spank Tubeless Wheel Builds Wheel Repairs

Michael's Spank Oozy Trail 395 Wheelset Rebuild

Michael is a local rider that we've ridden with over the years. He's certainly handy on the bike and uses his equipment hard. He contacted us when the alloy nipples started cracking on his Spank Oozy Trail 395 wheelset (supplied as original equipment on his bike). This is not uncommon, especially with the lower quality alloy nipples used as OEM (Original Equipment of Manufacture). It is certainly exacerbated when the nipples and spokes are not prepared correctly, nor the threads sealed following the build process. Keen for a pragmatic solution, that ensures better long term reliability, we suggested plain gauge Sapim...

Read more →


Andy's Spank 350 onto DT Swiss hubs

All Mountain Enduro Sapim Spank Tubeless Wheel Builds

Andy's Spank 350 onto DT Swiss hubs

Andy is a known bike trasher. He rides hard, and often. After smashing quite a few wheels that came as original equipment on his bikes, he asked us to build some solid Trail wheels for an upcoming race in Canada. Knowing how he rides, we suggested the super reliable Spank Oozy Trail 350 rims. They are lightish, super stiff, look great and robust. Not expensive either. DT Swiss 350 hubs are a wise choice too. Easy to get parts for, and a reasonable weight, once upgraded to the 54t freehub ratchet system, they are a solid workhorse. Sapim Race spokes...

Read more →